The ENERGIN M Series engines are available in following configurations:
GEN: Generators Set with remote radiator.
For applications with no demand for thermal energy
GEN+: Generators Set with heat recovery from engine jacket water.
For applications with lower thermal demand or direct use of hot exhaust gases
CHP: Cogenerator (Combined Heat and Power unit) with heat recovery from jacket water and exhaust.
For applications with high demand for thermal energy.
| Basic Scope of Supply for M Series engine configurations | GEN | GEN+ | CHP | 
|---|---|---|---|
| Four Stroke Gas engine coupled with single bearing alternator, mounted on common frame | ● | ● | ● | 
| Sound attenuating enclosure mounted on common frame with engine/generator | ○ | ○ | ○ | 
| Heat recovery from Engine jacket water and lube oil | - | ● | ● | 
| Heat recovery from exhaust cooling the exhaust to 120 / 180 °C in natural gas / biogas applications | - | - | ● | 
| Remote radiator | ● | ○ | ○ | 
| „ENERSCREEN“ Control system for engine generator and auxiliaries, set mounted with Touchpanel, with generator protection function | ● | ● | ● | 
| Synchronizing and mains protection functionality | ● | ● | ● | 
| Generator Circuit breaker set mounted | ● | ● | ● | 
| Manual lube oil drain pump | ● | - | - | 
| Electric pre-lubication pump. The pump can be used also to drain the used oil at oil change | ● | ● | ● | 
| Set mounted Lube oil make up tank with automatic level control on the engine oil pan for automatic compensation of oil consumption | ● | ● | ● | 
| Primary exhaust silencer, set mounted | - | - | ● | 
| Secondary exhaust silencer for residential area, loose | - | - | ○ | 
| Exhaust silencer single or double stage, loose | ○ | ○ | ○ | 
 
                                
 