The ENERGIN M Series engines are available in following configurations:
GEN: Generators Set with remote radiator.
For applications with no demand for thermal energy
GEN+: Generators Set with heat recovery from engine jacket water.
For applications with lower thermal demand or direct use of hot exhaust gases
CHP: Cogenerator (Combined Heat and Power unit) with heat recovery from jacket water and exhaust.
For applications with high demand for thermal energy.
Basic Scope of Supply for M Series engine configurations | GEN | GEN+ | CHP |
---|---|---|---|
Four Stroke Gas engine coupled with single bearing alternator, mounted on common frame | ● | ● | ● |
Sound attenuating enclosure mounted on common frame with engine/generator | ○ | ○ | ○ |
Heat recovery from Engine jacket water and lube oil | - | ● | ● |
Heat recovery from exhaust cooling the exhaust to 120 / 180 °C in natural gas / biogas applications | - | - | ● |
Remote radiator | ● | ○ | ○ |
„ENERSCREEN“ Control system for engine generator and auxiliaries, set mounted with Touchpanel, with generator protection function | ● | ● | ● |
Synchronizing and mains protection functionality | ● | ● | ● |
Generator Circuit breaker set mounted | ● | ● | ● |
Manual lube oil drain pump | ● | - | - |
Electric pre-lubication pump. The pump can be used also to drain the used oil at oil change | ● | ● | ● |
Set mounted Lube oil make up tank with automatic level control on the engine oil pan for automatic compensation of oil consumption | ● | ● | ● |
Primary exhaust silencer, set mounted | - | - | ● |
Secondary exhaust silencer for residential area, loose | - | - | ○ |
Exhaust silencer single or double stage, loose | ○ | ○ | ○ |